3 Series E36 M coupe (S50) COUPE
11 12 503
Dismantling and reinstalling cylinder head -
cylinder head removed (S50)
Special tools required:
•
00 1 490
•
11 0 192
•
11 0 194
•
11 0 342
•
11 0 343
•
11 1 045
•
11 1 065
•
11 1 067
•
11 1 071
•
11 3 411
•
11 3 412
Remove air guide from cylinder head.
Remove stud bolts from air guide on cylinder head.
Caution!
Note screw-in depth of stud bolts. If stud bolts are screwed in
too far, the air duct is blocked.
Installation:
Insert stud bolts with screw retaining compound.
Replace seal.
Unfasten screw on axle pin for guide wheel.
RA Dismantling and reinstalling cylinder head - cylinder head removed (S50)
BMW AG - TIS
09.02.2013 14:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
