3 Series E36 M coupe (S50) COUPE
Note:
The grooves in guide bearings of exhaust and intake
camshafts match the grooves in the 1st bearing cover.
Now slacken the two screws accessible on the inlet end of the
VANOS gear approx. two turns.
Now slacken the two screws accessible on the inlet end of the
VANOS gear two turns.
Dismantle VANOS adjustment unit and remove.
RA Replacing all camshafts (S50 B32)
BMW AG - TIS
09.02.2013 14:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -