3 Series E36 M coupe (S50) COUPE
Remove cover from hydraulic piston. Collar nut is accessible.
Caution!
Risk of damage to shaft.
Grip shaft with a hexagon socket. Release collar nut with a ring
wrench.
Note:
Only the use of an exactly fitting hexagon nut will prevent the
hexagon from being damaged and the shaft from being bent.
Unfasten screws (1 ... 9) from VANOS adjustment unit.
Unscrew end cover (VANOS bridge) on timing case.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S50 B32)
BMW AG - TIS
09.02.2013 14:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -