3 Series E36 M coupe (S50) COUPE
12 12 072
Replacing one spark-plug connector (M50,
S50)
M50:
Unclip caps on screws of ignition coil cover.
Unscrew bolts.
Remove cap of oil filler neck.
Lift and pull out ignition coil cover.
Note:
If it is not possible to remove the ignition coil cover, the cover
on the fuel injectors must be removed.
Refer to other procedures below.
Unclip cover on screws for the fuel injector rail.
Unscrew bolts.
Take cover off fuel injector rail.
Twist out ignition coil cover.
S50:
Unscrew bolts.
Remove ignition-coil cover.
RA Replacing one spark-plug connector (M50, S50)
BMW AG - TIS
09.02.2013 15:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
