3 Series E36 M coupe (S50) COUPE
Release clip (1) and remove hose to cyclone oil separator (2)
from vent pipe to cylinder head (3).
Unfasten screw (vent pipe on cylinder head).
Remove vent pipe.
Note:
Turn vent pipe slightly to remove.
Unfasten hose clip (1) and remove hose. Remove hose (2).
Unfasten nut (3) and turn pressure regulator to one side.
Caution!
Catch and dispose escaping fuel.
RA Removing and installing/replacing throttle body (S50)
BMW AG - TIS
09.02.2013 15:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -