3 Series E36 M coupe (S50) COUPE
Unfasten retaining screws on injection pipe.
Lift air pipe with pipe supports and injection pipe with injection
valves out together (lift in upwards direction).
Installation:
Replace all O-rings on pipe spigots.
Installation:
Check O-rings, replacing them if necessary.
When fitting, coat all O-rings with lubricant SAE 90.
RA Removing and installing/replacing throttle body (S50)
BMW AG - TIS
09.02.2013 15:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -