3 Series E36 M coupe (S50) COUPE
16 11 030
Removing and installing fuel tank (Z3)
Caution!
After the installation of the fuel tank / Prior to the first
engine start-up:
Check electrical resistance between bayonet head (tank
filler pipe) and body.
Measured value: approx. 0.6
Ω
Fill fuel tank with at least 5 liters of fuel.
Draw off fuel from fuel tank,
refer to 16 00 005.
Remove complete rear axle,
refer to 33 31 000.
On M Roadster, remove carbon canister,
refer to 16 12 010.
Unfasten ground strap.
Unlock and remove connecting nipple from tank ventilation line (1)
with special tool 16 1 040.
Inlet line (2)
Return line (3)
RA Removing and installing fuel tank (Z3)
BMW AG - TIS
09.02.2013 16:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -