3 Series E36 M coupe (S50) COUPE
23 .. ...
Replacing arrester balls on shift rods
(S6S 420G)
Caution!
Select 1st gear.
Remove splash guard.
Release screws (1).
Remove sealing cap (2).
Installation:
Insert screws (1) with washers and Loctite 243.
Tightening torque 23 31 2AZ.
Replace screws (1) with washers and sealing cap (2).
Carefully remove all 3 springs (1) and arrester balls (2) from bores
with a bar magnet.
Caution!
Do not remove dowel pins (3) inbetween.
RA Replacing arrester balls on shift rods (S6S 420G)
BMW AG - TIS
09.02.2013 17:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -