3 Series E36 M coupe (S50) COUPE
Adjusting toe:
Slacken bolts of bearing block by approx. 1 to 1.5 turns.
Attach special tool 32 3 080 over bolt head and between
stops (1).
Turn special tool 32 3 080 to adjust toe to specified value.
Tighten down bolts.
Tightening torque 33 32 13AZ
.
Bearing support with pin or notch:
Slacken bolts of bearing block by approx. 1 to 1.5 turns.
Attach special tool 32 3 030 to bolt head and pin (1).
Turn special tool 32 3 030 to adjust toe to specified value.
Tighten down bolts.
Tightening torque 33 32 13AZ
.
RA Adjusting rear axle (Saloon/Sedan, Coupé, Convertible, Touring)
BMW AG - TIS
09.02.2013 18:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -