3 Series E36 M coupe (S50) COUPE
Caution!
Ensure hood lid is correctly placed in relation to A-pillar and
door.
Ensure rear edge of lid is correctly positioned in relation to
windshield.
Pull hood lid forwards and close slowly.
Align hood lid with adjacent body parts.
Gap dimension approx. 5 mm all round.
Check and adjust correct position of bumper to hood lid.
Gap dimension approx. 5 mm all round.
Open hood lid slowly taking care not to disturb alignment.
RA Adjusting hood lid to fit (Z3)
BMW AG - TIS
09.02.2013 21:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -