3 Series E36 M coupe (S50) COUPE
51 13 280
Removing and installing trim strip on left or
right roof frame (Z3 coupé, M coupé)
First lever out trim strip (1) at rear with special tool 00 9 321
(fishbone), then unclip rest up to front and pull out of seal (2)
toward rear.
Replace defective clips (1) on roof outer skin if necessary.
Installation:
Push front trim strip (1) into seal (2), clip in at rear flush to
edge (3) and then clip in rest.
RA Removing and installing trim strip on left or right roof frame (Z3 coupé, M coup
BMW AG - TIS
09.02.2013 22:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
