bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing Trunk Lid Lock (lock Cylinder) (Z3 Coupé, M Co > < 2 RA Removing And Installing_replacing Left Or Right Gas Strut For Engine Bonnet_hood
Page 1
background image

51 24 040

Removing and installing/replacing luggage
compartment lid lock and striker (Z3 coupé,
M coupé)

Only for removing luggage compartment lid lock (trunk lid
lock upper part):

Remove tailgate trim panel,

refer to 51 49 008.

Lift out actuating rod (1).

Unfasten screws (2).

Push luggage compartment lid lock (3) into tailgate and to right.

Installation:

Mount actuating rod tension-free and readjust if necessary.

Check operation with trunk lid open.

Disconnect plug connector (1) and remove luggage compartment
lid lock (2).

Installation:

Adjust luggage compartment lid lock,

refer to 51 24 004.

Note:

Operation "Removing and installing/replacing luggage
compartment lid lock" ends here.

Removing and installing/replacing striker for luggage compartment
lid lock,

refer to 51 24 130.

RA  Removing and installing/replacing luggage compartment lid lock and striker (Z3 c

BMW AG - TIS

09.02.2013  22:39

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing_replacing Trunk Lid Lock (lock Cylinder) (Z3 Coupé, M Co > < 2 RA Removing And Installing_replacing Left Or Right Gas Strut For Engine Bonnet_hood