3 Series E36 M coupe (S52) COUPE
The bearing strips are marked with "A" for exhaust side and "E" for
intake side.
Note centering dowels on retaining pins at bearing points 2 and
7.
Install bearing strips.
If necessary, replace splined shaft in intake camshaft.
Clamp camshaft with protective vice jaws.
Remove splined shaft.
Installation:
Tightening Torque,
refer to Technical Data 11 31 5AZ
Note:
Differentiating features of camshafts on sprocket flanges:
A = Exhaust camshaft
E = Intake camshaft
RA Replacing camshaft (M52/S52)
BMW AG - TIS
09.02.2013 16:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -