3 Series E36 M coupe (S52) COUPE
13 71 000
Removing and installing intake filter housing
(M50,S50US,M52,S52)
Switch off ignition.
Twist and pull off connector (1).
Remove hose from idle speed actuator in rubber gaiter (2).
Unfasten hose clip and remove bellows.
Unfasten nuts (3 and 4).
Remove suction filter housing with mass air flow sensor and
rubber gaiter.
RA Removing and installing intake filter housing (M50,S50US,M52,S52)
BMW AG - TIS
09.02.2013 18:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -