3 Series E36 M coupe (S52) COUPE
Raise rear spoiler at bottom slightly;
with a scalpel (1) for heavy-duty applications,
cut through four gluing points.
Feed out cable (1) for auxiliary brake light and remove rear spoiler
(2).
If reusing the rear window (2), immediately prior to installation:
Remove residual adhesive (1) on rear window (2)
with a heavy-duty scalpel
at four gluing points (1) to approx. 0.5 mm.
Caution!
Clean freshly cut residual bead with spirit only,
under no circumstances use Sika bonding agent 205/5 or
BMW Cleaner.
If reusing the rear spoiler (1), immediately prior to installation:
Remove residual adhesive (2) on rear spoiler (1) with a scalpel for
heavy-duty applications at four gluing points (2) to approx. 0.5
mm.
Caution!
Clean freshly cut residual bead with spirit only,
under no circumstances use Sika bonding agent 205/5 or
BMW Cleaner.
RA Removing and installing/replacing rear spoiler (Z3 Coupé, M Coupé)
BMW AG - TIS
10.02.2013 00:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
