3 Series E36 M coupe (S54) COUPE
Disconnect plug connection on solenoid valve.
Connect special tools 12 6 050 and 12 6 411 to correct
terminals on car battery.
Actuate starter motor for approx. 20-30 secs.; to do so, press
buttons 1 and 3 alternately on special tool 12 6 050 .
Important!
Do not press and hold down buttons 1 and 3 permanently.
Press buttons 1 and 3 in short intervals.
Inlet and exhaust VANOS are retracted.
Crank engine at central bolt in direction of engine rotation.
If necessary, attach engine with special tool 11 5 100 to four
bolts of crankshaft hub.
Rotate crankshaft in direction of rotation up to cylinder 1 firing
TDC position.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S54)
BMW AG - TIS
09.02.2013 17:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
