3 Series E36 M coupe (S54) COUPE
Determine and mark out upper cowl panel cutting line.
Measurement (A) = 500 mm from cowl panel edge, bottom.
Determine and mark out upper cowl panel cutting line.
Measurement (A) = 50 mm from roof edge.
Cut cowl panel at top.
Clean windshield frame (adhesive remnants).
Drill out welding spots in windshield frame.
Drill out welding spots in door frame.
Drill out welding spots on door pillar (A-pillar).
Open brazed joints on door pillar.
Remove cowl panel.
RA Replacing left or right cowl panel (partial replacement in front of roof connect
BMW AG - TIS
10.02.2013 00:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
