bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Fitting Trunk Lid (Z3 Coupé)|Page 1625 > < 1 RA Fitting Trunk Lid (Z3 Coupé)|Page 1623
Page 4
background image

Caution!

Gas spring struts are removed. Unsecured trunk lid drops
down without damping!

Keep release button pressed down. Close trunk lid. 

Note:

Trunk lid lock must not snap into place. Lower section of trunk
lid lock centers itself.

Open tailgate and secure to prevent it from dropping.

Tighten screws (1) in lower section of trunk lid lock.

Check previous adjustments again. 

If necessary, repeat work steps.

Clip plastic covers (1) onto lower section of trunk lid lock.

Note:

Do not mix up covers of trunk lid hinges. Pay attention to
identifying markings.

LH = left cover

RH = right cover

Push on cover of trunk lid hinge on left and right.

RA  Fitting trunk lid (Z3 Coupé)

BMW AG - TIS

10.02.2013  00:26

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

1 RA Fitting Trunk Lid (Z3 Coupé)|Page 1625 > < 1 RA Fitting Trunk Lid (Z3 Coupé)|Page 1623