3 Series E36 M coupe (S54) COUPE
Remove glue residue in body cutout
down to approx. 0.5 mm.
Cut off old glue carefully with a heavy-duty scalpel to avoid
damaging the paint finish in body cutout.
When reusing glass roof frame:
Remove glue residue (1) on roof frame (2)
with a heavy-duty scalpel
down to approx. 0.5 mm.
When reusing glass roof frame:
If necessary, clean adhesive area with adhesive cleaner (sourcing
reference: BMW Parts Service).
Install new seals (1) and (2).
Caution!
The basic filler must have hardened!
Treat glass roof frame and body around glued area with BMW-
approved materials (repair kit, sourcing reference: BMW Parts
Service),
refer to 51 31 ...
Note:
Note ventilation time!
RA Removing and installing complete glass tilt (frame) (Z3 Coupé, M Coupé)
BMW AG - TIS
10.02.2013 01:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
