3 Series E36 M roadst (S50) ROADST
11 00 050
Removing and installing engine (S50)
Special tools required:
•
11 0 020
Follow instructions for disconnecting and connecting
battery, refer to general instructions in MG 12.
Disconnect negative battery lead.
E36
Lift engine hood into assembly position and remove firewall (air
manifold). These work steps are described in Removing complete
wiper bracket.
Z3
Move engine hood to assembly position:
Note:
The following work must be carried out with a second person
assisting. Work instruction applies to left and right sides.
Hold engine bonnet/hood.
Unclip retainer (1).
Unhook damper and suspend in ball head (2).
RA Removing and installing engine (S50)
BMW AG - TIS
09.02.2013 18:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -