3 Series E36 M roadst (S50) ROADST
Unfasten screws (1 ... 9) from VANOS adjustment unit.
Unscrew end cover (VANOS bridge) on timing case.
Caution!
Do "not" slacken the two screws that are now accessible at
the intake end of the VANOS gear.
Continue to rotate crankshaft in direction of rotation until the next
two screws on the VANOS gear are accessible.
Now unfasten the two screws accessible on the intake end of the
VANOS gear approx. two complete turns.
RA Adjusting timing of camshafts (S50 B32)
BMW AG - TIS
09.02.2013 19:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
