3 Series E36 M roadst (S50) ROADST
At the same time, rotate intake camshaft on hex head against
direction of rotation until groove on guide bearing is aligned with
groove of first bearing cover.
Note:
If necessary, press toggle switches on special
tool 12 6 412 several times in both directions until
camshaft starts to move.
Disconnect special tool 12 6 412 and special tool 12 6 410
and remove.
Disconnect compressed air.
Remove special tool 11 7 350.
Unfasten cover for hydraulic piston on intake end.
RA Removing and installing, sealing/replacing VANOS adjustment unit (S50 B32)
BMW AG - TIS
09.02.2013 19:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -