3 Series E36 M roadst (S50) ROADST
11 52 020
Removing and installing or replacing fan
coupling (S50)
Caution!
Left-hand threads.
Hold belt pulley in position using Special Tool 11 5 030 and
unscrew union nut on water pump.
Remove fan and fan coupling from water pump and removing
together with fan shroud,
refer to 17 11 031
Installation note:
Tighten fan with Special Tool 11 5 040.
For tightening torque, refer to Technical Data 11 52 1AZ
Note:
40 Nm tightening torque is equal to 30 Nm on scale of torque
wrench.
Unfasten screws and detach fan from fan coupling.
RA Removing and installing or replacing fan coupling (S50)
BMW AG - TIS
09.02.2013 19:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -