3 Series E36 M roadst (S50) ROADST
Spare trunk floor without trunk floor beam.
1 = direction of travel
Note:
View of spare trunk floor without trunk floor beam from underbody
area.
Adjust spare trunk floor with straightening angle set, reworking
connection points if necessary.
Remove spare trunk floor.
Manufacture reinforcement plate for connection point in left side
member from scrap sheet metal.
Width approx. 60 mm.
Manufacture reinforcement plate for connection point in right side
member from scrap sheet metal.
Width approx. 60 mm.
Coat reinforcement plate for connection point between left and
right side members with zinc dust paint.
RA Replacing complete rear trunk floor (tail panel removed) (Z3)
BMW AG - TIS
10.02.2013 00:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -