3 Series E36 M roadst (S50) ROADST
51 47 065
Removing and installing/replacing cover strip
at entrance, front left or right (Z3 Roadster,
M Roadster, Z3 Coupé, M Coupé)
Unfasten clip (1).
Carefully pull finisher strip, first upwards then forwards to unclip.
If necessary, lift clips off entrance.
Installation:
Soak clips in water for a short time.
Install clips and align.
If necessary, replace damaged clips.
Only replace:
Remove seal (1) from finisher strip (2).
RA Removing and installing/replacing cover strip at entrance, front left or right (
BMW AG - TIS
10.02.2013 02:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
