3 Series E36 M roadst (S50) ROADST
Installation:
Install new convertible cover with tackstrip in the convertible top
box (2-man operation).
Slide clamping belt loops on left/right sides over the brackets.
Screw down bracket on left/right joints, installing screws with
screw locking varnish.
Rivet left/right clamping belts on brackets (hole pattern in
clamping belt is specified).
Place cover over convertible top linkage.
Fit blind rivet with washer to left/right sides of convertible cover/B-
pillar bracket.
Fit rivet from outside => convertible cover, bracket, washer.
Note:
If necessary, replace the damaged gasket under the tackstrip.
Screw down tackstrip in convertible top box (operation is
described in):
Removing and installing complete convertible top (Z3 roadster),
refer to 54 31 010
RA Replacing convertible cover (Z3 roadster)
BMW AG - TIS
10.02.2013 02:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
