3 Series E36 M roadst (S50) ROADST
65 77 550
Removing and installing/replacing collision
sensor for left or right side airbag
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Turn ignition key to position 0.
Remove entrance cover strip.
Remove driver's seat.
Fold back carpet floor in area of driver's seat.
Disconnect plug connection.
Release screws and remove impact sensor for side airbag.
Installation:
Arrow (1) on impact sensor for side airbag must point to sill.
Observe tightening torque, 65 77 2AZ.
RA Removing and installing/replacing collision sensor for left or right side airbag
BMW AG - TIS
10.02.2013 04:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
