3 Series E36 M roadst (S52) ROADST
Unfasten plug connection (1) (illustrated here without intake air
manifold).
Unscrew and remove double temperature sensor for Digital Motor
Electronics (DME) and coolant indicator.
Tightening torque,
refer to Technical Data 13 62 2AZ
Installation:
Interrogate fault memory of DME control unit, check faults in
memory, rectify faults and clear fault memory.
RA Replacing temperature sensor for coolant (M52,S52)
BMW AG - TIS
09.02.2013 19:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
