3 Series E36 M roadst (S52) ROADST
16 12 010
Removing and installing/replacing carbon
canister (M Roadster, M Coupé and Z3/USA)
Open hose clip (1) and pull off evaporation line.
Installation:
Replace hose clip.
Unfasten plastic nut (1).
Unfasten hexagon bolt (2) and take off clamping strap (3).
Carefully lower the activated carbon canister.
Actuate unlocking fixture (2) and pull off vent line (1).
Unclip the tank vent line (1) and the vent line (2) on the front side
of the activated carbon canister.
Installation:
Clip in lines in the proper position.
RA Removing and installing/replacing carbon canister (M Roadster, M Coupé and Z3/US
BMW AG - TIS
09.02.2013 20:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
