3 Series E36 M roadst (S52) ROADST
Do not damage polished cylinder bore.
Carefully drive radial shaft seal (1) out of steering spindle housing
with a punch.
Thoroughly clean all parts.
Coat new seals with hydraulic fluid and fill radial shaft seals
between edge and sealing lip with grease,
refer to BMW Service Operating Fluids.
Replace O-ring (1).
Insert plastic bush (2) and thrust shim (3) in bearing sleeve.
Radial shaft seal (4)
Drive new radial shaft seal (4) - open side facing special
tool 32 1 140 /220 - firmly home in bearing bush.
RA Dismantling and reassembling power steering gear
BMW AG - TIS
09.02.2013 21:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
