3 Series E36 M roadst (S52) ROADST
Remove screw and pull off clip.
Press retaining hook and pull off switch.
Unscrew earthing cable.
Remove both headless screws and take off starter switch.
Installation:
Lock headless screws with varnish.
Lift out snap ring (1) and take off with sleeve (2).
Installation:
Fit bush (2).
Fit snap ring (1) with special tool 32 1 090 and steering
wheel retaining screw until it engages in groove of steering
spindle.
Snap ring (1) can also be mounted using special tool
32 3 070.
RA Disassembling and assembling complete steering column
BMW AG - TIS
09.02.2013 21:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
