3 Series E36 M roadst (S52) ROADST
Release screw.
Tightening torque, 33 17 4AZ.
Installation:
Replace self-locking nut.
Release screws. Lower workshop hoist a little and tilt out final
drive towards rear.
Tightening torque, 33 17 1AZ.
RA Removing and installing or replacing final drive (Compact, Z3)
BMW AG - TIS
09.02.2013 22:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
