3 Series E36 M roadst (S52) ROADST
Press off pulse spider.
Installation:
Press fit pulse alternator wheel using special tool 33 1 304.
Remove crown wheel (cold).
Press-fit new taper roller bearing to new final drive housing with
limited-slip differential cold using special tool 33 1 330.
Caution!
Only install both bearings of same make. Note make, which is
needed later to determine the friction torque.
Lift shaft seals out of both bearing caps.
RA Removing complete locking differential. (Type K) - final drive removed -
BMW AG - TIS
09.02.2013 22:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
