3 Series E36 M roadst (S52) ROADST
Caution!
Note space required for reinforcement/impact absorber
support (2).
Install approx. 30 mm of reinforcement plate (1) and weld into
place.
Install spare part (1) with reinforcement/impact absorber support.
2 = Reinforcement plate
Adjust spare part with straightening angle set to fit and secure.
Plug-weld reinforcement plate.
Weld spare part all round.
RA Replacing right engine support (partial replacement ahead of front axle) (Z3)
BMW AG - TIS
10.02.2013 00:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
