3 Series E36 M roadst (S52) ROADST
Remove or disconnect following parts:
-
Complete left tension strut
-
Complete rear oddments box
-
B-pillar upper and lower trim panel
-
Carpet (partial)
-
Complete convertible top
-
Rear side panel
Other vehicle parts located in the repair zone or subject to
damage from heat, sparks or dust, must be removed or covered.
Drill out welding points on outer B-pillar.
Expose and open up welding points and welding seams on side
section for front of B-pillar at the following connection points:
1 = Convertible top box
2 = Side section at rear of B-pillar (brazed seam)
3 = Wheel arch, outside rear
4 = Side member cover
5 = Reinforcement B-pillar
Remove B-pillar, front outer and side section.
RA Replacing cover for left side member (front door pillar removed) (Z3)
BMW AG - TIS
10.02.2013 00:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -