3 Series E36 M roadst (S52) ROADST
Weld connection point between trunk floor and
lamp console.
extension.
Weld up rear outer connection point on wheel arch for
shaped part for cavity sealing and
connection point in rear side section.
Caution!
When welding in the foam area, note hazard of combustion;
only weld short seams at a time and allow adequate time for
cooling.
Weld connection point in trunk floor
side member,
rear outer wheel arch,
and intermediate panel
extension.
Grind down connection points and seal.
RA Replacing rear inside left wheel arch (Z3)
BMW AG - TIS
10.02.2013 00:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -