3 Series E36 M roadst (S52) ROADST
M Roadster only:
Installation:
Engage hose (1) in air guide (2) if necessary.
M Roadster only:
Installation:
Push hose (1) onto bracket (2) if necessary.
Adjust bumper:
Ideal setting (dimension):
Transition (A) should be flush on left/right side.
(B) 5 mm (tolerance + 0.5/ -1 mm)
(C) Transition from below 5 mm (tolerance + 1/ -0.5 mm)
upwards to 2.5 mm (tolerance + 0.5/ -1 mm)
(D) 5 mm (tolerance + 1/ -0.5 mm)
(E) 5 mm (tolerance + 1/ -0.5 mm)
Loosen nut (1) from wheel arch and adjust bracket (2).
Note:
Adjustment possible with bumper fitted.
RA Removing and installing complete front bumper (Z3 Roadster, M Roadster)
BMW AG - TIS
10.02.2013 00:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -