3 Series E36 M roadst (S52) ROADST
51 47 490
Removing and installing/replacing underbody
protection, front (engine) (M Roadster,
M Coupé)
Unfasten screws (1 .. 2) and remove underbody protection (3).
Installation:
First tighten screws (1) (danger of damage).
Center underbody protection (3) and tighten screws (2).
Only replace:
Unfasten screws (1) and lift off air guide (2).
RA Removing and installing/replacing underbody protection, front (engine) (M Roadst
BMW AG - TIS
10.02.2013 01:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -