bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing _ Replacing Left Or Right Rollover Protection Bar (Z3 Ro|Page 1812 > < 1 RA Removing And Installing _ Replacing Bracket For Left Or Right Rollover Protectio
Page 1
background image

54 61 001

Removing and installing / replacing left or
right rollover protection bar (Z3 Roadster,
M Roadster)

Convertible top open and hardtop not fitted.

Version without "Harman-Kardon" Hifi system:

Unlock cover (1) and open.

Unclip cover (2) with long screwdriver through opening (3) for seat
belt.

Unclip cover (4).

Version without "Harman-Kardon" Hifi system:

Installation:

The retaining lugs (2) of the cover (1) may not be damaged.

Version without "Harman-Kardon" Hifi system:

Loosen screws (1) by 10 mm and pull out roll bar (2) upward.

Installation:

While tightening the screws (1) the roll bar (2) must be
pressed down, as otherwise the mounting holes will be
damaged.

Tightening torque, refer to Technical Data 54 61 1AZ

RA  Removing and installing / replacing left or right rollover protection bar (Z3 Ro

BMW AG - TIS

10.02.2013  01:39

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing _ Replacing Left Or Right Rollover Protection Bar (Z3 Ro|Page 1812 > < 1 RA Removing And Installing _ Replacing Bracket For Left Or Right Rollover Protectio