3 Series E36 M roadst (S54) ROADST
VS-24/Stocker
Baugruppe/Group: 12
12 02 02 (858)
weltweit
außer Japan
Datum/Date:
Crankshaft sensor on M54
E36, E39, E46, E53 / M54
Complaint:
- The following faults may be stored in the fault memory:
(083) 53 "Crankshaft sensor signal"
(244) F4 "Segment timing - concentricity fault"
- "Check engine" lamp lights up on US models
- Vehicle goes into emergency program
Cause:
Two causes are possible:
1. Component fault on crankshaft pulse transmitter
2. Insufficient fault tolerance in DME data status, i.e. the fault is not automatically rectified.
Affected
vehicles:
E36/7, E39, E46, E53 with M54 engine
Manufacturing period: from start of series production to 01.01.2001
Procedure:
In case of customer complaint, proceed as follows:
Replace the crankshaft sensor and program the current data status from CD 27.0 or later.
Observe the notes in repair instructions 12 14 705 and on the CD used (e.g. Programming
Drive Train P27.0).
Parts:
Description
Part number
Quantity
Crankshaft pulse transmitter 12 14 1 709 616
1
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms.
Defect code
12 14 97 96 00
This defect code is not contained in the official
Defect Code Catalogue but has been included in
the system, thus enabling warranty claims to be
processed.
Program DME data status and replace crankshaft
pulse transmitter:
Within the scope of a visit to the workshop:
Job number
00 53 792
Labour
8 FRUs E36/7 (Z3)
8 FRUs E46/3/4 four-wheel drive
11 FRUs E46/2/3/4/5 and convertible
10 FRUs E39 and E39/2
9 FRUs E53
In case of order without additional repair
operations:
Job number
00 53 277
SI Crankshaft sensor on M54 E36 E39 E46 E53 M54
BMW AG - TIS
09.02.2013 18:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -