3 Series E36 Z3 coupe (M52) COUPE
Remove gasket (1).
Remove rubber clip (2).
Unfasten hose clip (3) and remove hose.
Installation:
Replace gasket (1). Coat housing of idle speed control valve
with anti-friction coating.
Check engine idle speed.
Interrogate fault memory of DME control unit, check faults in
memory, rectify faults and clear fault memory.
RA Replacing idling speed control valve (M52, S52)
BMW AG - TIS
11.02.2013 02:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -