3 Series E36 Z3 coupe (M52) COUPE
13 54 030
Removing and installing / sealing throttle
valve necks (M52)
Removing mass air flow sensor,
refer to 13 62 560
Disconnect cable (1).
Remove hoses for throttle valve preheating unit and seal (some
coolant will escape).
Unscrew bolts.
Remove throttle valve neck and gasket.
Installation note:
Replace seal.
RA Removing and installing / sealing throttle valve necks (M52)
BMW AG - TIS
11.02.2013 02:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
