3 Series E36 Z3 coupe (M52) COUPE
25 16 061
Replacing handle for selector lever
Unscrew cheese-head screw (3 mm hexagon socket).
Pull off handle with pull rod.
Installation:
For tightening torque,
refer to Technical Data
Disconnect pull rod (button not pressed).
Engage pin (1) of button in bore (2) of pull rod.
RA Replacing handle for selector lever
BMW AG - TIS
11.02.2013 04:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -