3 Series E36 Z3 coupe (M52) COUPE
Insert a screwdriver through opening on rear side of steering
wheel and press down on lock. If a springy resistance can be felt,
press down lock as far as it will go and pull airbag unit (1) away
from steering wheel.
Repeat procedure on opposite side.
For purposes of clarity, the procedure is shown in the next picture
with the airbag unit already removed.
Using screwdriver (2), press down on lock (1).
Installation:
Insert airbag unit with hooks into locks and press into steering
wheel.
Unlock airbag plug connection:
Lever out lock (1) with a screwdriver.
RA Removing and installing or replacing airbag unit (inserted airbag unit)
BMW AG - TIS
11.02.2013 06:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
