3 Series E36 Z3 coupe (M52) COUPE
Remove propeller shaft from drive flange.
Disconnect cable plug from pulse generator speedometer.
Release screws.
Tightening torque, 33 21 1AZ.
Remove output shafts and tie up.
Installation:
Fit shims (1).
Support final drive with transmission hoist and special tool
33 4 390.
E36 / S54 (Z3):
Support final drive with transmission hoist and special tool
33 4 410 .
RA Removing and installing or replacing final drive (Compact, Z3)
BMW AG - TIS
11.02.2013 06:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -