3 Series E36 Z3 coupe (M52) COUPE
Open cover (1).
Unpin both elbow contacts (2) with
special tool 61 1 132 from cable plug (3).
Lever out cover (1) and remove from cable plug (2).
Unpin both elbow contacts (1) with
special tool 61 1 132 from cable plug (2).
Releasing motor and gear:
Release screws (1) and remove motor/gear (2).
Installation:
Replace screws.
Tightening Torque,
refer to Technical Data 54 10 1AZ.
RA Removing and installing/replacing motor and gear for glass tilt roof actuation (
BMW AG - TIS
11.02.2013 11:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
