3 Series E36 Z3 coupe (M52) COUPE
Pass blade of knife parallel to roof frame.
Cut through glue bead all around and as close as possible to roof
frame.
1.
Body opening
2.
Glue bead
3.
Knife
4.
Glass tilt roof frame
Lever out roof frame (4).
Pull off adhesive tapes all round.
Note:
If the glass roof frame cannot be removed:
Using a heavy-duty scalpel (1),
cut through glue bead from inside.
Caution!
To ensure long-term corrosion protection, it is absolutely
essential to repair paintwork damage (scratches and large-
surface damage),
refer to 51 31 ...
RA Removing and installing complete glass tilt (frame) (Z3 Coupé, M Coupé)
BMW AG - TIS
11.02.2013 11:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -