3 Series E36 Z3 coupe (M52) COUPE
Before installing glass roof frame:
Install trim strip on roof frame, left and right,
refer to 51 13 280.
Install glass roof cover and close fully with motor/gear (zero
position),
refer to 54 10 100.
Disassemble motor/gear again.
Insert locating clip (1) in mount for cover kinematics (2).
Installation:
Open a side window to prevent a pressure buildup in the car
interior when the door is closed.
Mount glass roof frame (1) with special tool 51 3 010 on tool
trolley.
Cut nozzle to size.
Dimensions:
(A) 7.5
-1
mm
(B) 8
-1
mm
Check expiry date of glue!
Note:
For an even application of adhesive bead:
Use a cartridge gun (operated pneumatically or electrically,
sourcing reference: BMW Parts Service).
RA Removing and installing complete glass tilt (frame) (Z3 Coupé, M Coupé)
BMW AG - TIS
11.02.2013 11:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -