3 Series E36 Z3 (M44) ROADST
11 14 141
Replacing radial seal below timing case cover
(M44)
Remove vibration damper,
refer to 11 23 010
Fit Special Tool 11 2 313 on crankshaft.
Screw in Special Tool 11 2 310 so far until it is rigidly connected
with radial sealing ring.
Remove radial sealing ring by tightening in the screw.
Coat sealing lips of new radial sealing ring with oil.
With Special Tool 11 4 150 and central screw, install radial
sealing ring flush with timing-case cover.
RA Replacing radial seal below timing case cover (M44)
BMW AG - TIS
10.02.2013 22:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
