3 Series E36 Z3 (M44) ROADST
Installation:
The position of the dowel sleeve (1) in the dual-mass
flywheel is marked with two notches beside the respective
screw bore.
Installation:
Clean thread and install new micro-encapsulated screws.
Tightening torque,
refer to Technical Data 11 22 1AZ
RA Removing and installing or replacing flywheel (M44)
BMW AG - TIS
10.02.2013 22:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
